Paper weight meter, electronic weight scale
This instrument is suitable for cutting round samples of various woolen, cotton, chemical fiber, knitted and other fabrics.
Sampling area: Use an electronic balance to weigh the cut sample, and then * will be the weight of one square meter of textile, which is very convenient! !
(The blade itself is installed and ready for use)
Instructions for use:
Lay the fabric to be cut flat on the rubber mat, place the disc sampler on the fabric, and pull out the sampler Locking device, rotate about 10 degrees, hold the outer cover with one hand, hold the corrugated handwheel with the other hand, and apply a certain amount of pressure, then rotate the corrugated handwheel clockwise (the rotation angle is greater than 10 degrees), and the round sample can be cut.
After use, the sampler is locked and rotated to its original position so that the blade cannot be exposed to avoid injury to hands and other items.
3 Electronic grammage meter
Product advantages:
The disc sampler produced by our company uses real copper pins, the mounting blade is a special thickened blade, and the handle and central axis are all made of aluminum
br/> Structure and adjustment:
The cutter blade is a double-sided blade with a total of four pieces, evenly distributed in four equal parts outside the circle. The blade can be replaced. The specific operation is: loosen the cross screw (there are four screws on each piece) ), remove the blade pressure plate and sampling blade, replace with a new blade, press the blade pressure plate, make sure the blade mouth is tangential clockwise, and make the four knife edges in the same plane, then tighten the cross screws.
There are straight grooves on the bottom of the instrument, which are used to fix the sample, facilitate cutting, and prevent the sample from slipping.
Notes:
The blade of this instrument is sharp. Do not put your hands on the bottom during use to avoid damage.
The most important part of this product - the shaft, is made of fine steel to ensure that it will not get tired after long-term use.
About products: Standard conventional products are in stock. If you need to customize non-standard products, please confirm the delivery date with the salesperson.
About delivery: Small items go to STO Express, large items go to Logistics (choose the most appropriate logistics based on the customer’s address, if the customer’s factory has logistics reachable, please inform us). Small items will be delivered to the company, while large items need to be picked up by the customer. If delivery is required, please inform us!
Regarding returns and exchanges: Due to the company's formal procedures, standard products will not be returned if there are no quality problems. If you buy the wrong replaceable product, customized products will not be returned, so please be careful before placing an order.
About after-sales service: All products sold by our company that have product failures caused by product quality are guaranteed for one year from the date of purchase. If the warranty exceeds one year, parts and maintenance fees will be charged as appropriate based on the fault condition. During this period, if any failure or damage occurs due to non-product quality reasons, all costs incurred by the supplier for maintenance services for the demander shall be borne by the demander. After one year, the supplier will continue to provide paid technical services and lifetime maintenance.
Non-warranty scope: Any failure caused by improper use and storage, failure to use the power supply according to regulations, failure caused by natural disasters, ground change, rodent infestation, insect infestation, self-disassembly and repair. All costs for maintenance services provided by the purchaser shall be borne by the purchaser. After one year, the supplier will continue to provide paid technical services and lifetime maintenance.
Paper weight meter, electronic weight scale
Paper weight meter, 600g electronic weight scale