Shanwei Aluminum Foil Special Disc Sampler
How to calculate fabric weight:
Function: Standard cutting of square centimeter fabric samples. When in use, lay the fabric to be cut flat on a special rubber mat, place the sampling knife on the fabric, and then pull out the safety switch of the sampling knife. At this time, press the sampling knife protective seat with your left hand and rotate the round handle of the sampling knife clockwise with your right hand. , draw a circle and sampling is completed. Return the sampling knife switch to its original position. Put the cut fabric sample into the gram weight electronic balance, weigh the sample, and multiply by times to get the gram weight of the square meter of fabric. For example: the weight data of the removed fabric is .gram, then the square meter of fabric is grams.
Green
Structure and adjustment:
The cutter blade is a double-sided blade with a total of four pieces, evenly distributed in four equal parts outside the circle. The blade can be replaced. The specific operation is: loosen the cross screw ( There are four screws on each piece), remove the blade pressure plate and sampling blade, replace with a new blade, press the blade pressure plate, make sure the blade mouth is tangential clockwise, and make the four knife edges in the same plane, then tighten the cross screws That’s it.
There are straight grooves on the bottom of the instrument, which are used to fix the sample, facilitate cutting, and prevent the sample from slipping.
Standard specifications of the sampler:
Sampling area in square centimeters Sampling diameter: .3 Sampling thickness:
Differences between two different sampling knives on the market:
Iron core sampling knife: copper-plated The latch and the mounting blade are ordinary razor blades, and the handle is made of rubber and plastic
Aluminum core sampling knife: the real copper latch and the mounting blade are special sampling blades, and the handle and central shaft are all made of aluminum
Produced by our company The most important part of the disc sampling knife - the shaft, is made of fine steel to ensure that it will not get tired after long-term use.
Steps for using the electronic weight meter:
Place the rubber gasket under the fabric to be sampled, lay the fabric to be sampled flat, and place the sampler on top of the fabric to be sampled.
.Pull out the yellow protective plug next to the sampling knife.
3. Hold the sampling body with your left hand and the black handle with your right hand. Press down and rotate it more than 10 degrees to take out a square centimeter-sized fabric sample
. Place the taken out fabric sample on the precision Weigh it on an electronic balance. Multiply the weighed weight to get the weight of one square meter of this kind of fabric. This is what we call square meter weight.
Genuine licensed goods
Our company assures you that all the products sold are genuine licensed goods, and the company can issue formal VAT invoices.
Nationwide Warranty
All products sold by our company will be guaranteed for one year from the date of purchase if any product failure occurs due to product quality. If the warranty exceeds one year, a charge will be made as appropriate based on the failure condition. Parts and maintenance costs During this period, if any failure or damage occurs due to non-product quality reasons, all costs incurred by the supplier in providing maintenance services to the demander shall be borne by the demander. After one year, the supplier will continue to provide paid technical services and lifetime maintenance.
Non-warranty scope: Any failure caused by improper use and storage, failure to use the power supply according to regulations, failure caused by natural disasters, ground change, rodent infestation, insect infestation, self-disassembly and repair. All costs for maintenance services provided by the purchaser shall be borne by the purchaser. One year later, the supplier will continue to provide paid technical services and lifetime maintenance
Shanwei aluminum foil special disc sampler
Shanwei aluminum foil special disc sampler